Showing posts with label McCall 6170. Show all posts
Showing posts with label McCall 6170. Show all posts

Tuesday, 17 May 2011

Declaring my First UFO

Immensely frustrated with the McCalls 6170. Today I decided I had enough of it and needed a long, very long break!
The lower band sleeve was a nightmare to construct. I didn't fully understand the instructions and the sleeve is too narrow to go on the machine's free arm. I done each and re-done many times and settled at a mediocre result in the end.
Even though I pinned the collar matching notches and centre back seam it is uneven and wonky.
To add to that I have no idea how I did this topstitching!
And when I think I can disguise some issues with a good press, the iron does this to my collar!
I don't think the jacket is terribly difficult to construct but for some reason since Saturday I have been extremely clumsy even with basic, normal things. And now I think the jacket is jinxed somehow so want nothing to do with it, for a while. And actually, a alteration muslin I did on Vogue 8604 trousers (started on Saturday) was also a disaster so it will wait to.

I will relax for the rest of the week and start afresh, with new fabrics and patterns, next weekend! Hopefully this won't last :(

Monday, 25 April 2011

RTW Tailoring Sew Along - Bound Buttonholes

Following my buttonhole nightmare with Vogue 8604 I decide to learn how to do bound buttonholes and use them for my jacket.  I followed Tasia from Sewaholic tutorial and was pleasantly surprised to find out how easy they were. Sherry and Gertie also have brilliant tutorials. In fact it is dead easy when you doing isolated bound buttonholes, but when you need to do five, perfectly lined up the story is completely different.
I thought I had marked the placement lines carefully:
But somehow along the line, I ended up with two different buttonholes, so wonky that the only way to cover would be to get huge buttons. I was frustrated and only managed a lousy photo on my phone to share with my twitter followers.
CarmencitaB came to my rescue (as she always does, thank you!) and shared this link (from a blog that I now follow), which shows more complex bound buttonhole marking techniques. I didn't follow it by the letter but took what I needed which was mark, mark, mark!! I can only hope all those markings will disappear easily. I also basted all buttonhole lips before I started poking holes, to make sure they all aligned.
And the results were much better!
I have attached the outer jacket shell (minus sleeves) and inserted the fake flap pockets. Sherry shared a tutorial for jet pockets and I was determined to try them. But I confess, poking more holes in this jacket made me nervous so I stuck with the fake ones!

Tuesday, 19 April 2011

The Interfacing Tale - RTW Tailoring Sew Along

I have certainly not forgotten this brilliant sew along and now that I can be sure to have a dress to wear for the wedding in a couple of weeks time, it's time to tackle my summer jacket. It's not a standard tailored look so not all posts by the brilliant Sherry will apply but I'm learning lots nonetheless and definitely bookmarking posts for the future.
One of the brilliant things I have learned is blockfusing. After reading about it I thought: "Oh my, it's so simple but it makes perfect sense. Why haven't I thought of it". There's beauty in the simplest of things! Unfortunately for me, I couldn't do this with my jacket. Because I knew I would be busy with My Sabrina Dress, I cut the pattern pieces a long time before Sherry posted about blockfusing.
So I've cut and fused all pieces and learned (or relearned) a couple of things on the way. One is about how to buy and store interfacing. I have bought several weights and qualities depending on what patterns ask. I usually buy more than the pattern asks for as I reckon I will end up using it. But (and this is a big but) after I use it I "shove it" on my cabinet with the other interfacings without labelling or marking. Duh! For someone who still can't recognise weights and types of fabric and interfacing just by touch this is a tad silly. So now, everytime I need to interface something I fuse all types on scraps. Pretty silly no?
The second thing that keeps happening (and I keep repeating) is illustrated in the two photos below:
Can you see what happened there? The first photo shows my lovely front piece with accurate markings made using my favourite method, carbon paper and tracing wheel. Seconds later we have a beautifully fused front piece but where the heck are the markings? Gone with the fuse! I end up pinning the pattern tissue again and re-marking. And always forget about it.
I'm interested to hear form you. How do you deal with pattern marking and notches on pieces to be interfaced?

*Apologies for the weird colour in photos. I love sewing at night but I pay the price with lousy photos.

LinkWithin

Related Posts Plugin for WordPress, Blogger...